Replacing solid metal handles with synthetic material results in shears that weigh considerably less.
Lighter weight shears require less pressure to use. The fatigue, muscle ache and risk of neuromuscular disease associated
with repeated cutting tasks is substantially reduced.
Blades on Fiskars lightweight shears are made to industrial grade standards. Blade integrity, hardness and edge life, is as good
or better than traditional solid steel models, regardless of weight or gauge.
Note the new Fiskars Softgrip® cushion handle and Softouch® ergonomic models.
Select Fiskars to accomplish cutting tasks more easily, accurately and efficiently, with less effort and greater
safety. All models have adjustable pivot screws.
FISKARS fatigue reducing shears cut as well or better than solid
steel
models that weigh twice as much.
__________________________________________
Fiskars High Performance Models
Specific for cutting Fiberglas™, Dyneema™, Kevlar™, Spectra™,
Vectran™ Laminates, Pre-preg & Similar Engineered Materials
| Fiskars Tool Steel Kevlar Cutters |
|
| Best choice for Kevlar tow or fabric. |
* Special
high alloy steel blades are guaranteed to cut abrasive mineral or high strength polymers at least 15 times longer than ordinary
shears.
* Corrosion resistant blades are hardened to a very high degree, Rockwell C 59-60, assuring durability and long life.
* Both blade edges have serrations to provide superior gripping power.
* Handles are made from a high-strength reinforced plastic that is resistant to acetone commonly used for
cleaning.
* These lightweight shears cut as well or better than heavier, more costly hot-forged
models. 9 ½" x 4 ½" cut.
9449 Shears. Pointed tips. $51.40
9449B Shears. Blunted tips. $51.80
9449F Shears. Fully rounded safety tips. $52.20
_____________________________________
Fiskars Model 9449 Shears Alternatives
| Both blades serrated. |
|
| Same size and pattern as model 9449. |
| Grip and cut Kevlar, fiberglass, etc. |
|
| Model 9441S blade. |
These shears are the same pattern
and size as model 9449 described above but their blades are made of standard cutlery grade stainless steel.
While they do not cut engineerd texiles as long as the premium 9449 models before sharpending is needed, they perform as well. Both
blade edges are serrated.
9 ½" x 4½" cut.
9441DS Shears. Pointed tips. $22.15
9441DSB Shears. Blunted tips. $22.55
_______________________________________
New! Fiskars
Titanium Nitride Softgrip® Shears
| Extra large handles. |
|
| Cuts tough materials. |
* Precisely ground stainless steel blades coated with industrial titanium nitride for longer lasting edges that resist
corrosive chemicals and sticky adhesives. Ideal for wet processing applications.
*
Award winning advanced ergonomic design includes extra-large handles suited to gloved hands.
*
Adjustable pivot screws for controlling tension.
*
Larger handle for greater leverage, control and use with gloves.
*
An excellent choice for tough, dense and heavy fabrics, laminates, webbing, belting, leather, rubber and plastic sheeting.
Standard
Models. Both blades serrated. Choose for cutting the strongest
materials, including Kevlar (aramid), carbon fibers, fiberglass and composites. These shears firmly grip
material assuring clean cuts without binding.
12-7172
Shears. Pointed tips. 9½" x 4½" cut. $24.30
12-7172B Shears. Blunted tips. $24.75
Modified Models.
Keen edge cutting blade and serrated integral blade. Choose for slippery synthetics.
12-7172S
Shears. Pointed tips. 9½" x 4½" cut. $24.30
12-7172SB Shears. Blunted tips.
$24.75
Traditional Edge Models. Both blades have keen edges. Choose
for cutting all ordinary fabrics.
12-7172NS Shears. Pointed tips.
9½" x 4½" cut. $24.30
12-7172NSB
Shears. Blunted tips. $24.75
__________________________________________
If you are cutting composites,
glass
fibers or Kevlar, read this.
Mineral fibers are very abrasive and tend to wear blade edges at a different angle than Kevlar
does. While the same pair of scissors or shears used to cut fiberglass may be used to cut graphite (carbon) fibers, avoid
using them to cut Kevlar.
Keep Blades Clean When finished cutting, always clean residual
fibers from blades. Acetone is recommended for dissolving and removing prepreg resins, urethane, adhesives, epoxies etc.
_______________________________________
SERRATED BLADE MAINTNEANCE. To assure correct sharpening of serrated edge blades, please ship your shears to us for service.
CLICK HERE
______________________________________
New! Fiskars Economy
Titanium Nitride Softgrip® Shears
For Cutting All Ordinary Fabrics
* TiN coating provides an extremely hard surface for longer
lasting edges and resistance to corrosive chemicals and sticky adhesives.
* Tough synthetic handles with soft rubber inserts for a comfortable, slip-proof
grip.
* Strong fixed pivot never needs adjusting.
* Serrated blade models firmly grasp slippery synthetics.
* Models available with blunted safety tips.
| Popular bent handle pattern. |
|
| Excellent choice for trim work. |
2217 Shears. 9"
x 3½" cut. $6.10
2217S Serrated
integral blade. $7.10
************************************************************
| Safety tips pattern. |
|
| Avoid accidental injury. |
2217B Shears.
Blunted tips. $6.55
2217SB Serrated
integral blade. $7.55
________________________________________________
| Softgrip® cushioned handle. |
|
| Popular sewing model. |
2210 Shears. Pointed
tips. 8" x 3" cut. $5.25
2210S Shears.
Serrated integral blade. $6.00
2210B Shears.
Blunted tips. $5.70
2210SB Shears.
Serrated integral blade. $6.45
**********************************************************
FISKARS SOFTOUCH® Ergonomic
Models
| Truly ergonomic. |
|
| Soft rubber handle. |
* Serrated edge holds material while cutting.
* Extended lower blade allows full cuts without the need to reposition the tool.
* Spring loaded for reduced user fatigue.
* Adjustable reinforced rivet for added strength.
* Comfortable non-slip soft rubber handles.
Recommended for cutting carpet, cord, fabric, felt, fiberfill & batting,
fiberglass, foam, high density polypropylene, insulation, leather, mat board, paper, rope, rubber, screen, plastic tubing,
upholstery, vinyl!
9911 Shears.
Pointed tips. 8" x 3¾" cut. 18.00
9911B Shears.
Blunted tips. $18.40
_______________________________________
| Light tension. |
|
| Longest Softouch® model. |
Largest Softouch®
model. Extended lower blade facilitates a complete cut without the need to reposition shears. Serrated integral
Gator Blade® firmly grips material to reduce cutting effort. 11¾" x 4½" cut.
7929 Shears. On tip blunted. $23.70
7929B Shears. Both tips blunted. $24.15
_______________________________________
SEE DISCOUNTED LIGHTWEIGHT MODELS HERE
Fiskars Standard Models
| Cuts multi-plies. |
|
| Cutting room favorite. |
FISKARS large bent trimmers. Oversize handle permits use with glove or large hand.
9 ½" x 4¼" cut.
Letter S refers to serrated integral blade. K to knife edge cutting blade.
9441 Shears. Pointed tips. $20.15
9441SK Shears. Pointed tips. $22.15
9441B Shears. Blunted tips. $20.60
9441SBK Shears. Blunted tips. $22.95
_______________________________________
| Sewing machine operator favorite. |
|
| Dressmaker's choice. |
FISKARS most popular bent handle model. 8" x 3¾" cut.
Letter S refers to serrated integral blade. K to knife edge cutting blade.
9451 Shears. Pointed tips. $13.80
9451SK Shears. Pointed tips. $15.35
9451B Shears. Blunted tips. $14.25
9451SBK Shears. Blunted
tips. $15.80
______________________________________
| Use in either right or left hand! |
|
| Softgrip® Cushioned handle. |
FISKARS SOFTGRIP® ambidextrous bent handle
models. 8" x 3½" cut.
Letter S refers to serrated integral blade. K to knife edge cutting blade.
9880 Shears.
Pointed tips. 8" x 3½" cut. $14.30
9880SK Shears. Pointed tips. $15.80
9880B Shears.
Blunted tips. $14.70
9880SBK Shears.
Blunted tips. $16.25
_______________________________________
| TRUE LEFT HAND MODEL |
|
| Comfortable, contoured handle. |
FISKARS Left Hand Bent Handle Shears. 8" x 3¾" cut.
Letter S refers to serrated integral blade. K to knife edge cutting blade.
9450 Shears. LEFT HAND Pointed tips. $13.45
9 450SK Shears. LEFT HAND Pointed tips. $14.85
9450B Shears. LEFT HAND Blunted tips. $13.75
9450SBK Shears. LEFT HAND Blunted tips. $15.30
-----------------------------
LEFT HAND models with both blades serrated to gasp and cut the toughest materials,
including Kevlar, carbon fibers, fiberglass and composites.
9450DS Shears. LEFT HAND Pointed tips. $14.85
9450DSB Shears. LEFT HAND Blunted tips. $15.30
_______________________________________
IMPORTANT For proper maintenance, please return your shears to us. We have the skills and equipment to correctly sharpen the
blades and restore the serrations. All work is done internally and is fully guaranteed. For details, click here.
| Cuts clean. |
|
| Does not pull cloth. |
FISKARS Softgrip® Pinking Shears. Run and cut evenly with no
snagging. Extended lower blade holds fabric between blades for more efficient cutting. Ergonomic comfort soft rubber handle.
Excellent choice to prevent raveling or produce decorative edges.
9898 Shears. 9" x 3" cut. $30.80
_______________________________________
| Best EMT model. |
|
| Ambidextrous. Use in either hand. |
| Blades separate for easy cleaning. |
|
| Good choice for food service. |
| High strength. |
|
| Cuts thick, dense materials. |
Blades separate for easy cleaning and sharpening. Unusually strong solid steel joint tolerates constant pressure when
cutting heavy material, vinyl flooring, carpet and webbing.
Excellent EMT shears. Cut Nylon seat straps, heavy clothing, leather belts, rubber boots, rawhide laces.
Serrated integral blade assures a firm grip. Notch in base provides extra leverage. Ambidextrous - use in either
hand. Fit securely in Eberly model 2 Holster. 7" x 2½" cut.
9474 Shears. Pointed tips. $14.10
9474B Shears. Blunted tips.
$14.55
______________________________________
New! Titanium Nitride Softgrip® Multi-Snips
| High leverage TiN coated snips. |
|
| Soft rubber handle |
* Coated
with industrial titanium nitride for longer lasting edges that resist corrosive chemicals and sticky adhesives.
* Spring
action and comfortable handles reduce fatigue.
* Thumb
release lever for easy use.
* Integral
wire cutting notch.
* Adjustable
pivot screw.
* Serrated
integral blade model assures a firm grip on slippery material.
* Cut
the toughest belting, webbing, braid, rope, wire, cable and everything in between.
12-7922
Shears. 8" x 1¾" cut. $20.80
12-7922S
Shears. Serrated blade. $21.60
_______________________________________
| Light, comfortable, versatile. |
|
| Strong riveted construction. |
Quick
Release Multi-Snip. High carbon steel blades ground for long lasting sharpness. Serrated integral blade firmly grips material.
Contoured, spring loaded handles help reduce hand fatigue. Simple thumb release lever for quick activation. Cuts vinyl,
light sheet metals, and screen. 7½" x 1½" cut.
0232 Fiskars
Shears. $14.35
_______________________________________
FISKARS Sewing & Craft Scissors
| Extra-large handles. |
|
| Micro tips assure precise cuts. |
| Model 9476 blades. |
|
| Finely pointed tips for cutting close stitches. |
|
